USE: TRAVEL / LEISURE XC / ALL MOUNTAIN
VINES: self-tapping CROSS HEAD
WEIGHT: 74 G THE PAIR WITH SCREWS
The plate, compatible with the pedals of the range S-Track, allows to increase considerably the support surface for a better control and a maximum safety in steps and technical impegantivi. In this configuration, the S-Track pedal with cleat meets the needs of a wide range of disciplines ranging from the All Mountain Enduro.
Thanks to the plate, you can also easily use your pedal S-Track, without automatic locking, for use in travel.
870MM2 SURFACE SUPPORT
The S-Track equipped with the plate provides a bearing surface of 870mm2 for a maximum contact foot / shoe in any position: docked or undocked. Equipped with anti-slip surfaces and a large bearing surface, this version allows you to confidently deal with the safety and technical singletrack.
EASY TO INSTALL
The plate S-Track is designed to be assembled and disassembled in a few seconds with the help of four screws to pedal.
How to proceed? A protective device to avoid improper operation, on which there is the symbol L for Left (Left) and R for Right (Right), will prevent you from mounting the plate on the other hand avoiding the collision with the deflector. Install the two half plates of the one part and the other part of the body of the pedal and incastratele thanks to small pins. Finally, place the 4 screws to hold together the two half-plates and tighten to the specified torque.
LT CAGE: self-threaded screw head cross
What are the benefits? You will get a greater bearing surface - 870 mm2 - to start the singletrack and technical descents with confidence, thanks to better control and greater stability.
Write Your Own Review
If you have purchased or received an incorrect product, if you need to replace or activate the conventional warranty open an RMA request using the Returns Management module in your Account