Effetto Mariposa Torque Wrench Giustaforza II 2-16 Deluxe
Capacity from 2 up to 16 Nm:
this is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.
Easy to use:
- set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other)
- insert the appropriate bit (depending on the bolt you need to tighten)
- using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached
- always take the wrench to minimum torque value after use.
Minimal fixed head:
Giustaforza’s simple, ‘non-ratcheting’ head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.
the light aluminum body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.
A state-of-the art tool, built to last:
functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched iscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece.
Metal box with EVA internals:
with internals in high density EVA foam and an aluminum outer shell, thi box protects the torque wrench against shocks, hosting both the wrench and the bits (bits are only supplied with DELUXE torque wrench versions).
the +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service we offer in our laboratories at the cost of 35€ plus shipping expenses (may vary depending on the countries: check terms & conditions with the national distributor). After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate.
The DELUXE version is equipped with a bicycle-specific bit set:
bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard lenght (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.
All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.
Detail of bits:
10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)
3x100mm (HEX4, HEX5, T25)
If you have purchased or received an incorrect product, if you need to replace or activate the conventional warranty open an RMA request using the Returns Management module in your Account
Availability is indicated for each item in the relative product sheet. If there are more options (for example color, size, etc.) select the combination of your interest to know the exact availability.
it means that it is immediately available in our warehouse, the indicated availability refers to a single piece, for the purchase of more pieces the necessary quantity must be placed in the cart and then checked the actual availability in the cart.
SHIPPED IN 3-5 DAYS
they are items that can be purchased but are not available for immediate delivery. By purchasing a product with the wording To order, the customer is aware that he is purchasing an unavailable item and therefore there is a wait for the order to be processed (they can be 1-2 days but also 7-8 based on the procurement times of the specific supplier). There is also the possibility that for these articles also the supplier does not have availability: the customer will be promptly notified so that he can cancel whether to wait a longer time or cancel the article or order. Check carefully the indications on the chart before sending the order. For more information, see the Terms and Conditions page.
The average processing time is 1-2 working days if all the products are indicated as available in the cart. For more information, see the Terms and Conditions page.
Delivery times, following receipt of the shipping confirmation email, vary according to the selected courier.
- Italy - TNT courier - Delivery in 1/5 working days
- Italy - Amazon Shipping - Delivery in 24/48h (working days + Saturday & Sunday)
- Italy - GLS courier - Delivery in 1/5 working days
- Italy - BRT courier - Delivery in 24/48h (working days)
- Europe - FedEx courier - Delivery in 2/3 working days
- Europe - DPD courier - Delivery in 3/5 working days
- Europe - Spring GDS postal service - Delivery in 5/9 working days
- Rest of the world - FedEX and UPS courier - Delivery in 5/9 working days
- Rest of the world - EMS postal service - Delivery in 7/10 working days
Delivery times are indicative since shipments are managed directly by the courier and not by Gambacicli. For more information, see the Terms and Conditions page.
Orders are processed quickly and, for available items, they are entrusted to the courier in 24/48h.
Pay easily and safely with PayPal, Credit Card, cash on delivery or Money Transfer. Your privacy is granted by verified connections and the best security technologies.
Something went wrong with your order? Just open a guided return request from your account and you'll receive the assistance you need.
For any answer, our Customer Care is at your disposal.